Description
These are your first real systems program. They will mimic the functionality of the program tar, which bundles up files and directories into a single file, and which can then use that file to recreate the files and directories.
Although this is a single lab writeup, there are two labs here, and you have a week for each lab. Specifically:
-
Lab #5A: You are to write the program tarc, which stands for “tar create”, and works similarly to “tar cf”.
-
Lab #5B: You are to write the program tarx, which stands for “tar extract”, and works similarly to “tar xf”.
Both of these are explained in great detail below, with examples.
Description of tarc
Tarc takes a single argument on the command line. This should be the name of a directory. It can be an absolute pathname, or a relative pathname. Tarc will then create a tarfile, which has enough information to recreate the directory and all of its contents. It prints this tarfile on standard output.
The tarfile has a specific format. For each file and directory, it will print the following information:
-
The size of the file’s name, as a four-byte integer in little endian.
-
The file’s name. No null character.
-
The file’s inode, as an eight byte long in little endian.
If this is the first time that we have encountered a file with that inode, then it will print the following additional information:
-
The file’s mode, as a four byte integer in little endian.
-
The file’s last modification time, in seconds, as an eight byte long in little endian.
Finally, if the file is a file, and not a directory, then it prints the following final information:
-
The file’s size, as an eight byte long in little endian.
-
The file’s bytes.
This is enough information for you to recreate the directory and its contents, including hard links. A few things of note:
-
As in the prsize lecture, you should ignore “.” and “..”.
-
You should also ignore symbolic links — if you encounter one, simply omit it from the tarfile.
-
Although you don’t have to generate your tarfile to be an exact copy of my tarfile, it has to be readable by my programs. More on that below.
-
In the tarfile, a directory must appear before any files in that directory. However, otherwise, directories and files may appear in any order.
-
If the specified directory is a relative or absolute pathname with the ‘/’ character in it, then you need to split that pathname into a prefix and a suffix. In your tarfile, you should only include the suffixes.
-
Remember that when you extract files from a tarfile (either a regular tar file or ones created by tarc), the inodes will be different from what the were in the tar file.
To explore tarc go ahead and work in a fresh directory. Obviously, do this on a lab machine:
UNIX> ls UNIX> # First, unpack d1.tar in the lab directory. This is a regular tar file. UNIX> tar xpfv /home/jplank/cs360/labs/lab5/d1.tar d1/ d1/f1.txt d1/f2.txt d1/f3.txt d1/sub/ d1/sub/f1.txt UNIX> # Next, let's look at the contents of d1. You can see f1.txt, f2.txt and f3.txt. UNIX> # f1.txt and f3.txt are hard links. F2.txt and sub/f1.txt have different protections: UNIX> ls -li total 0 894388406 drwxr-xr-x. 3 jplank loci 55 Feb 16 10:00 d1 UNIX> ls -li d1 total 12 894428207 -rw-r--r--. 2 jplank loci 3 Feb 13 17:00 f1.txt 894750231 -rw-------. 1 jplank loci 6 Feb 14 08:51 f2.txt 894428207 -rw-r--r--. 2 jplank loci 3 Feb 13 17:00 f3.txt 963609657 drwxr-xr-x. 2 jplank loci 19 Feb 14 09:44 sub UNIX> ls -li d1/sub total 4 963609658 -r--------. 1 jplank loci 5 Feb 15 18:04 f1.txt UNIX> # Let's see what's in those fx.txt files: UNIX> grep . d1/f?.txt d1/f1.txt:Hi d1/f2.txt:There d1/f3.txt:Hi UNIX> cat d1/sub/f1.txt THOR UNIX>
Now, I’ll create a tarfile using tarc in the lab directory, and I’ll examine its contents using xxd (read the man page).
UNIX> /home/jplank/cs360/labs/lab5/tarc d1 > d1.tarc UNIX> xxd -g 1 d1.tarc 0000000: 02 00 00 00 64 31 b6 48 4f 35 00 00 00 00 ed 41 ....d1.HO5.....A 0000010: 00 00 78 25 68 5c 00 00 00 00 09 00 00 00 64 31 ..x%h\........d1 0000020: 2f 66 31 2e 74 78 74 2f e4 4f 35 00 00 00 00 a4 /f1.txt/.O5..... 0000030: 81 00 00 71 93 64 5c 00 00 00 00 03 00 00 00 00 ...q.d\......... 0000040: 00 00 00 48 69 0a 09 00 00 00 64 31 2f 66 32 2e ...Hi.....d1/f2. 0000050: 74 78 74 17 ce 54 35 00 00 00 00 80 81 00 00 66 txt..T5........f 0000060: 72 65 5c 00 00 00 00 06 00 00 00 00 00 00 00 54 re\............T 0000070: 68 65 72 65 0a 09 00 00 00 64 31 2f 66 33 2e 74 here.....d1/f3.t 0000080: 78 74 2f e4 4f 35 00 00 00 00 06 00 00 00 64 31 xt/.O5........d1 0000090: 2f 73 75 62 39 84 6f 39 00 00 00 00 ed 41 00 00 /sub9.o9.....A.. 00000a0: c5 7e 65 5c 00 00 00 00 0d 00 00 00 64 31 2f 73 .~e\........d1/s 00000b0: 75 62 2f 66 31 2e 74 78 74 3a 84 6f 39 00 00 00 ub/f1.txt:.o9... 00000c0: 00 00 81 00 00 61 45 67 5c 00 00 00 00 05 00 00 .....aEg\....... 00000d0: 00 00 00 00 00 54 48 4f 52 0a .....THOR. UNIX>
We should be able to account for every byte in this file. To wit:
-
Bytes 0-3: Filename size = 0x00000002 = 2.
-
Bytes 4-5: Filename: 0x64 0x31 = “d1”.
-
Bytes 6-13: Inode: 0x00000000354f48b6 = 894388406.
-
Bytes 14-17: Mode: 0x000041ed = 100 000 111 101 101. (Directory)
-
Bytes 18-25: Modification time = 0x000000005c682578 = 1550329208.
-
Bytes 26-29: Filename size = 0x00000009 = 9.
-
Bytes 30-38: Filename: “d1/f1.txt”.
-
Bytes 39-46: Inode: 0x00000000354fe42f = 894428207.
-
Bytes 47-50: Mode: 0x000081a4 = 001 000 000 110 100 100.
-
Bytes 51-58: Modification time = 0x000000005c649371 = 1550095217.
-
Bytes 59-66: File size = 0x0000000000000003 = 3.
-
Bytes 67-69: The bytes: 0x48, 0x69, 0x0a = “Hi\n”.
-
Bytes 70-73: Filename size = 0x00000009 = 9.
-
Bytes 74-82: Filename: “d1/f2.txt”.
-
Bytes 83-90: Inode: 0x000000003554ce17 = 894750231.
-
Bytes 91-94: Mode: 0x00008180 = 001 000 000 110 000 000.
-
Bytes 95-102: Modification time = 0x000000005c657266 = 1550152294.
-
Bytes 103-110: File size = 0x0000000000000006 = 6.
-
Bytes 111-116: The bytes: 0x54, 0x68, 0x65, 0x72, 0x65, 0x0a= “There\n”.
-
Bytes 117-120: Filename size = 0x00000009 = 9.
-
Bytes 121-129: Filename: “d1/f3.txt”.
-
Bytes 130-137: Inode: 0x00000000354fe42f = 894428207.
-
Since this file has the same inode as “f1.txt”, it’s a hard link, we’re done.
-
Bytes 138-141: Filename size = 0x00000006 = 6
-
Bytes 142-147: Filename: “d1/sub”.
-
Bytes 148-155: Inode: 0x00000000396f8439 = 963609657.
-
Bytes 156-159: Mode: 0x000041ed = 100 000 111 101 101. (Directory)
-
Bytes 160-167: Modification time = 0x000000005c657ec5 = 1550155461.
-
Bytes 168-171: Filename size = 0x0000000d = 13.
-
Bytes 172-184: Filename: “d1/sub/f1.txt”.
-
Bytes 185-192: Inode: 0x00000000396f843a = 963609658.
-
Bytes 193-196: Mode: 0x00008100 = 001 000 000 100 000 000.
-
Bytes 197-204: Modification time = 0x000000005c674561 = 1550271841.
-
Bytes 205-212: File size = 0x0000000000000005 = 5.
-
Bytes 213-217: The bytes: 0x54, 0x48, 0x4f, 0x52, 0x0a = “THOR\n”.
Spend some time on the list above and how it maps to the bytes of the tarfile. You need to understand this exactly to do the lab.
Now, suppose I specify d2, but with a prefix — “././d1/../d1” — that specifies the same directory as before, but in a different way. As you’ll notice, the two tarfiles are identical, because the prefix has been stripped off:
UNIX> /home/jplank/cs360/labs/lab5/tarc ././d1/../d1 > d1a.tarc UNIX> diff d1.tarc d1a.tarc UNIX>
Suppose that you recreate the directory d1 from its original tar file. You’ll see that the names, modes, bytes and modification times are guaranteed to be the same as the first time, but but the inodes will be different. We can see that reflected in the tarfile.
UNIX> rm -rf d1 d1a.tarc UNIX> tar xpfv /home/jplank/cs360/labs/lab5/d1.tar d1/ d1/f1.txt d1/f2.txt d1/f3.txt d1/sub/ d1/sub/f1.txt UNIX> /home/jplank/cs360/labs/lab5/tarc ././d1/../d1 > d1b.tarc UNIX> diff d1.tarc d1b.tarc Binary files d1.tarc and d1b.tarc differ UNIX> xxd -g 1 d1.tarc | head -n 6 0000000: 02 00 00 00 64 31 b6 48 4f 35 00 00 00 00 ed 41 ....d1.HO5.....A // -- inode of d1 0000010: 00 00 78 25 68 5c 00 00 00 00 09 00 00 00 64 31 ..x%h\........d1 0000020: 2f 66 31 2e 74 78 74 2f e4 4f 35 00 00 00 00 a4 /f1.txt/.O5..... // -- inode of d1/f1.txt 0000030: 81 00 00 71 93 64 5c 00 00 00 00 03 00 00 00 00 ...q.d\......... 0000040: 00 00 00 48 69 0a 09 00 00 00 64 31 2f 66 32 2e ...Hi.....d1/f2. 0000050: 74 78 74 17 ce 54 35 00 00 00 00 80 81 00 00 66 txt..T5........f // -- inode of d1/f2.txt UNIX> xxd -g 1 d1b.tarc | head -n 6 0000000: 02 00 00 00 64 31 28 14 52 3d 00 00 00 00 ed 41 ....d1(.R=.....A // -- inode of d1 0000010: 00 00 78 25 68 5c 00 00 00 00 09 00 00 00 64 31 ..x%h\........d1 0000020: 2f 66 31 2e 74 78 74 29 14 52 3d 00 00 00 00 a4 /f1.txt).R=..... // -- inode of d1/f1.txt 0000030: 81 00 00 71 93 64 5c 00 00 00 00 03 00 00 00 00 ...q.d\......... 0000040: 00 00 00 48 69 0a 09 00 00 00 64 31 2f 66 32 2e ...Hi.....d1/f2. 0000050: 74 78 74 2a 14 52 3d 00 00 00 00 80 81 00 00 66 txt*.R=........f // -- inode of d1/f2.txt UNIX>
The mrd program
The program mrd is a program that will create a directory full of files and directories that exhibit the range of behaviors that we’re expecting you to handle with tarc. It is called as follows:
usage: mrd seed dir-level fpd randprot(n|y|d) linkperc stem |
The arguments are:
-
seed for srand48(). Yes, it’s a bad RNG, but it’s fine for this purpose.
-
dir-level: this is the maximum number of nested subdirectories. They will always be a chain of directories of length dir-level. There may be more than one.
-
fpd: Maximum files per directory.
-
randprot: If ‘y’, set the protection bits of files randomly. The “user read” bit and the “world read” will always be set. If ‘d’, also set the protection bits of directories randomly. The “user/world read” and “user/world execute” bits will always be set.
-
linkperc the percentage of times that the program will create hard links to existing files rather than new files.
-
stem this is the directory into which to put the files.
Here’s an example:
UNIX> ls UNIX> /home/jplank/cs360/labs/lab5/mrd usage: mrd seed dir-level fpd randprot(n|y|d) linkperc stem UNIX> /home/jplank/cs360/labs/lab5/mrd 2 1 15 y 50 ex1 UNIX> ls -li --full-time ex1 total 52 553947704 -rwx-w-r--. 1 jplank loci 74 2009-07-13 23:07:50.000000000 -0400 BBQEF 553947709 -r-x---r--. 3 jplank loci 2 2009-01-12 15:53:33.000000000 -0500 dBVq4ob3 553947709 -r-x---r--. 3 jplank loci 2 2009-01-12 15:53:33.000000000 -0500 eIPt2ytg1e7gwhmc 553947706 -r-x--xr-x. 3 jplank loci 3 2009-03-31 15:06:37.000000000 -0400 Frhxr 553947707 -r-----r-x. 1 jplank loci 69 2009-10-23 07:25:54.000000000 -0400 HHOSU2o5 553947706 -r-x--xr-x. 3 jplank loci 3 2009-03-31 15:06:37.000000000 -0400 JikTtd0eo 553947710 -r---wxr--. 2 jplank loci 70 2009-05-14 15:08:31.000000000 -0400 kQV5 553947706 -r-x--xr-x. 3 jplank loci 3 2009-03-31 15:06:37.000000000 -0400 mAVDOy 553947710 -r---wxr--. 2 jplank loci 70 2009-05-14 15:08:31.000000000 -0400 sAEuZwlRtaTPX5v 553947711 -r-----r-x. 1 jplank loci 11 2009-10-05 07:53:15.000000000 -0400 wb31yIuVqOuDZ 553772035 -r-----r--. 1 jplank loci 50 2009-01-14 21:20:06.000000000 -0500 yqOzTZXl3SZ94Vkv 553947708 -r-x-w-r-x. 1 jplank loci 45 2009-10-22 00:43:57.000000000 -0400 YTn9k 553947709 -r-x---r--. 3 jplank loci 2 2009-01-12 15:53:33.000000000 -0500 ZUl UNIX>
As you can see, it created a directory ex1 with 13 files, many of which are hard links to each other (e.g. dBVq4ob3 and eIPt2ytg1e7gwhmc). The bytes in the files are random, BTW, so if you want to look at them, use xxd.
One of the nice things about mrd is that if you give it the same parameters, it always creates the same directory structure with the same file/directory names and the same modification/access times. Therefore, you can use it to help test your tarc programs.
In the following example, I specify random protections on directories too:
UNIX> /home/jplank/cs360/labs/lab5/mrd 2 2 5 d 50 ex2 UNIX> ls -li ex2 total 4 846068234 dr-x-w-r-x. 2 jplank loci 45 Apr 21 2009 iqOuDZX 674147657 dr-xrw-r-x. 2 jplank loci 26 Jun 17 2009 JfHOSU2o56Nxb31y 895575575 dr-x---r-x. 2 jplank loci 51 Jun 25 2009 kQV5 615228457 -r-----r--. 2 jplank loci 73 Apr 9 2009 S0eo1jYBQ 756542011 drwx-w-r-x. 2 jplank loci 6 Oct 29 2009 XxUlqOhUik UNIX> ls -li ex2/iqOuDZX total 8 615228457 -r-----r--. 2 jplank loci 73 Apr 9 2009 eIPt2ytg1e7gwhmc 895575577 -r--r--r-x. 3 jplank loci 15 Sep 17 2009 zRtaTPX5v UNIX> ls -li ex2/JfHOSU2o56Nxb31y total 4 895575577 -r--r--r-x. 3 jplank loci 15 Sep 17 2009 gdBVq4ob376lA UNIX> ls -li ex2/kQV5 total 12 895575577 -r--r--r-x. 3 jplank loci 15 Sep 17 2009 al3SZ94Vkv3aOCTn 895575578 -r--r-xr-x. 2 jplank loci 52 May 4 2009 DVD 895575578 -r--r-xr-x. 2 jplank loci 52 May 4 2009 tZUqO UNIX> ls -li ex2/XxUlqOhUik total 0 UNIX>
You’ll note that ex2/S0eo1jYBQ and ex2/iqOuDZX/eIPt2ytg1e7gwhmc are hard links to each other.
One thing about these directories — when the protection has changed so that the write bit isn’t set, you can’t delete them, even with “rm -rf”, without changing the protection back. For example, if I try to delete ex2, I get an error:
UNIX> rm -rf ex2 rm: cannot remove ‘ex2/JfHOSU2o56Nxb31y/gdBVq4ob376lA’: Permission denied rm: cannot remove ‘ex2/iqOuDZX/eIPt2ytg1e7gwhmc’: Permission denied rm: cannot remove ‘ex2/iqOuDZX/zRtaTPX5v’: Permission denied rm: cannot remove ‘ex2/kQV5/al3SZ94Vkv3aOCTn’: Permission denied rm: cannot remove ‘ex2/kQV5/tZUqO’: Permission denied rm: cannot remove ‘ex2/kQV5/DVD’: Permission denied UNIX>
To delete it, I need to first recursively set the protections to something I can delete:
UNIX> chmod -R 0755 ex2 UNIX> rm -rf ex2 UNIX>
The tarf program
You call tarf in one of two ways:
tarf < tarfile -- Prints out information about the tarfile. tarf debug < tarfile -- Also prints out information while reading the tarfile.
The information that tarf prints out is sorted by filename. Here’s an example. I’m going to recreate d1 again, so that it will have different inodes than before:
UNIX> tar xpfv /home/jplank/cs360/labs/lab5/d1.tar d1/ d1/f1.txt d1/f2.txt d1/f3.txt d1/sub/ d1/sub/f1.txt UNIX> /home/jplank/cs360/labs/lab5/tarc d1 > d1.tarc UNIX>
Now, I call tarf on it, and it prints out information about all of the files/directories, sorted by inode:
UNIX> /home/jplank/cs360/labs/lab5/tarf < d1.tarc Inode 362606622 Mode 40755 Hash 00000000 Mtime 1550329208 Name: d1 Inode 362606623 Mode 100644 Hash 0b87f2c0 Mtime 1550095217 Name: d1/f1.txt Name: d1/f3.txt Inode 362606624 Mode 100600 Hash d363a247 Mtime 1550152294 Name: d1/f2.txt Inode 425644584 Mode 40755 Hash 00000000 Mtime 1550155461 Name: d1/sub Inode 425644585 Mode 100400 Hash 0e17e06c Mtime 1550271841 Name: d1/sub/f1.txt UNIX>
You see that the two hard links are printed together. Also, I calculate a hash of each file’s contents. Directories have hash values of zero. Tarf is nice because if you have two tarfiles for the same directory, even though the tarfiles may differ (because of the order in which you specify files and directories), the output of tarf will be the same. If I’m bored someday, I’ll demonstrate it. For now, just accept that it’s true.
If you call tarf with “debug”, it prints out the information as it reads it in from the tarfile. This may be helpful to you for debugging when your tarfiles have errors.
The gradescript for this part of the lab is gradescript-5a, and the gradeall is gradeall-5a. The gradescript goes through the following steps for gradescript i.
-
It calls my tarc on the file in Gradescript-Examples/i. It puts the tarfile into tmp-i-correct-tarfile.txt.
-
It calls your tarc on the file in Gradescript-Examples/i. It puts the tarfile into tmp-i-your-tarfile.txt.
-
When it makes that call, it limits you to ten file descriptors, so be aware of that. (It does that by calling your program with the program limit-shell) in the lab directory. You can read the source code of that if you care to.
-
If your program had an error, it will stop there.
-
It calls tarf on my tarfile. That goes into tmp-i-correct-stdout.txt.
-
It calls tarf on your tarfile. That goes into tmp-i-your-stdout.txt.
-
It tests to see that those two files are identical.
On the issue of open files — I’m limiting your process to 10 open files, because I want you to pay attention to keeping that number low. For that reason you need to:
-
Call fclose() when you’re done with a file that you have opened with fopen().
-
Call closedir() when you’re done with a directory that you have opened with opendir().
-
Test the return values of fopen() and opendir(), and if they are NULL, then use perror() to print the error, and then exit. This will save you countless hours of headaches on segmentation violations.
If you want to limit the number of file descriptors in your tarc.c program to ten, to help you debug, then you can put the following into your code /home/jplank/junk.txt
#include <sys/time.h>
#include <sys/resource.h>
/* ..... then, inside your main(): */
int i;
struct rlimit l;
i = getrlimit(RLIMIT_NOFILE, &l);
l.rlim_cur = 10;
i = setrlimit(RLIMIT_NOFILE, &l);
|
You don’t have to do this, because my gradescript does it using limit-shell. You also cannot raise your file descriptor limit in this way. Sorry.
Description of tarx
Tarx recreates a directory from a tarfile, including all file and directory protections and modification times. It reads the tarfile from standard input.
That’s really all of the description tarx needs. But I’ll walk you through an example. Take a look at the directory test-dir, in the lab directory:
UNIX> ls -li /home/jplank/cs360/labs/lab5 | grep test-dir 963647548 drwxr-xr-x. 4 jplank loci 79 Dec 25 2009 test-dir UNIX> ( cd /home/jplank/cs360/labs/lab5 ; ls -li test-dir ) total 12 963647550 -r-x-wxr--. 2 jplank loci 30 Apr 8 2009 lTFYSC 1016031860 drwx--xr-x. 2 jplank loci 72 Aug 23 2009 Md1jUzS6 963647551 -rw----r-x. 1 jplank loci 3 Feb 12 2009 sOdKRmzyPT3mXX4 15975445 dr-xr--r-x. 2 jplank loci 79 Jul 5 2009 T7ZdQl 963647549 -r-x-w-r--. 1 jplank loci 32 Sep 29 2009 TkB UNIX> ( cd /home/jplank/cs360/labs/lab5 ; ls -li test-dir/Md1jUzS6 ) total 16 1016031862 -rwxr--r-x. 1 jplank loci 78 Oct 16 2009 aA4X7tu6u 1016031861 -r--r--r--. 1 jplank loci 17 Sep 7 2009 QFIoNAT 15975447 -r--rw-r--. 2 jplank loci 8 Apr 18 2009 tBSlghe 1016031863 -r-----r--. 1 jplank loci 71 Jul 14 2009 ymSZrTV0u0vrAHL UNIX> ( cd /home/jplank/cs360/labs/lab5 ; ls -li test-dir/T7ZdQl ) total 16 15975447 -r--rw-r--. 2 jplank loci 8 Apr 18 2009 aDH 15975448 -r-x--xr-x. 1 jplank loci 53 May 20 2009 i4obCmgB1ZHpDy7q 15975446 -r---wxr--. 1 jplank loci 32 Oct 10 2009 JJbBXDSpYO23pb6- 963647550 -r-x-wxr--. 2 jplank loci 30 Apr 8 2009 RCPdAWLBsz UNIX>
This is a challenging directory from a tarx perspective. But first, let’s go ahead and create a tarc file, and call tarf on it to verify our understanding of it. Do this in a fresh directory:
UNIX> ls UNIX> /home/jplank/cs360/labs/lab5/tarc /home/jplank/cs360/labs/lab5/test-dir > td.tarc UNIX> xxd -g 1 td.tarc | head -n 2 0000000: 08 00 00 00 74 65 73 74 2d 64 69 72 3c 18 70 39 ....test-dir<.p9 0000010: 00 00 00 00 ed 41 00 00 95 8b 35 4b 00 00 00 00 .....A....5K.... UNIX> /home/jplank/cs360/labs/lab5/tarf < td.tarc | head -n 15 Inode 963647548 Mode 40755 Hash 00000000 Mtime 1261800341 Name: test-dir Inode 1016031860 Mode 40715 Hash 00000000 Mtime 1251081491 Name: test-dir/Md1jUzS6 Inode 1016031861 Mode 100444 Hash 9802f4b8 Mtime 1252360768 Name: test-dir/Md1jUzS6/QFIoNAT Inode 1016031862 Mode 100745 Hash 2a0b3a18 Mtime 1255692354 Name: test-dir/Md1jUzS6/aA4X7tu6u Inode 15975447 Mode 100464 Hash d629e03e Mtime 1240070091 Name: test-dir/Md1jUzS6/tBSlghe Name: test-dir/T7ZdQl/aDH UNIX>
As you can see, the files test-dir/Md1jUzS6/tBSlghe and test-dir/T7ZdQl/aDH are hard links to each other. Also, to repeat myself, the bytes in the files are random, so don’t try to cat them. Instead, use xxd:
UNIX> xxd -g 1 /home/jplank/cs360/labs/lab5/test-dir/lTFYSC 0000000: d3 44 27 cf a1 b6 06 4b ca 03 e2 fc b8 2f 34 67 .D'....K...../4g 0000010: a8 4c c6 9e 94 5e 3e 0d 6c 80 d6 99 e1 92 .L...^>.l..... UNIX>
What makes this directory a challenge is the subdirectory test-dir/T7ZdQl. You’ll note that its write protection is not set. For that reason, you cannot set its mode until after you have created all of its files and subdirectories. That’s not a difficult matter, so long as you pay attention to it.
I’ll call my tarx on the tarfile, and you’ll see that it recreates the files and directories with the same protection modes and modification times:
UNIX> /home/jplank/cs360/labs/lab5/tarx < td.tarc UNIX> ls -li total 4 756586508 -rw-r--r--. 1 jplank loci 1018 Feb 17 10:49 td.tarc 492968489 drwxr-xr-x. 4 jplank loci 79 Dec 25 2009 test-dir UNIX> ls -li test-dir total 12 492968491 -r-x-wxr--. 2 jplank loci 30 Apr 8 2009 lTFYSC 554271758 drwx--xr-x. 2 jplank loci 72 Aug 23 2009 Md1jUzS6 492968492 -rw----r-x. 1 jplank loci 3 Feb 12 2009 sOdKRmzyPT3mXX4 654220282 dr-xr--r-x. 2 jplank loci 79 Jul 5 2009 T7ZdQl 492968490 -r-x-w-r--. 1 jplank loci 32 Sep 29 2009 TkB UNIX> ls -li test-dir/Md1jUzS6 total 16 554271761 -rwxr--r-x. 1 jplank loci 78 Oct 16 2009 aA4X7tu6u 554271760 -r--r--r--. 1 jplank loci 17 Sep 7 2009 QFIoNAT 554271763 -r--rw-r--. 2 jplank loci 8 Apr 18 2009 tBSlghe 554271762 -r-----r--. 1 jplank loci 71 Jul 14 2009 ymSZrTV0u0vrAHL UNIX> ls -li test-dir/T7ZdQl total 16 554271763 -r--rw-r--. 2 jplank loci 8 Apr 18 2009 aDH 610087472 -r-x--xr-x. 1 jplank loci 53 May 20 2009 i4obCmgB1ZHpDy7q 610085407 -r---wxr--. 1 jplank loci 32 Oct 10 2009 JJbBXDSpYO23pb6- 492968491 -r-x-wxr--. 2 jplank loci 30 Apr 8 2009 RCPdAWLBsz UNIX> xxd -g 1 test-dir/lTFYSC 0000000: d3 44 27 cf a1 b6 06 4b ca 03 e2 fc b8 2f 34 67 .D'....K...../4g 0000010: a8 4c c6 9e 94 5e 3e 0d 6c 80 d6 99 e1 92 .L...^>.l..... UNIX>
The Gradescript
The gradescript for this part of the lab is gradescript-5b, and the gradeall is gradeall-5b. The gradescript goes through the following steps for gradescript i.
-
It calls your tarx on the file Gradescript-Examples/i.tarc. That should create the directory i in the current directory. It also puts stdout and stderr into tmp-i-your-stdout.txt. and tmp-i-your-stderr.txt.
-
It limits the number of file descriptors to 10 in the tarx call.
-
It calls tarf on Gradescript-Examples/i.tarc, stripping out the inodes from stdout. It puts stdout and stderr into tmp-i-correct-stdout.txt. and tmp-i-correct-stderr.txt.
-
If one of them flagged an error and the other one didn’t (which is checked by seeing if either program wrote into stderr), then it’s an error.
-
If both flagged errors, then your program is correct, and the gradescript exits.
-
Otherwise, it calls my tarc on your new directory i and flags errors if there are any.
-
If no errors, then it calls my tarc on your new directory i and pipes the output to tarf, stripping out the inodes, and putting the output into tmp-i-tarf-output.txt.
-
It tests to see that tmp-i-correct-stdout.txt are the same tmp-i-tarf-output.txt.
You should note that the tarfiles may or may not be created by my tarc. However, with the exception of gradescripts 41-50, they will be legal tarfiles. With gradescripts 41-50, the tarfiles are bad, and your program must print an error message on standard error and exit. Your error messages do not have to match mine exactly.
Ten Open Files
The gradescripts limit you to ten open files when you run both tarc and tarx. To test yourself, the simplest way to do this is to do, for example,
UNIX> csh -c "limit descriptors 10; ./tarx < td.tarc"
That way you execute the command in a sub-shell that is limited to 10 open files, but you don’t limit your own shell to 10 open files.
Useful System Calls
You will most definitely need to use the following system calls. Make sure you read their man pages:
-
lstat(). Obviously, stat()/lstat() have their own lecture, so make sure you go through those lecture notes. You’ll be making use of the st_mtime field of the struct stat, which on some machines is not straightforward. Fortunately, on our lab machines, it is straightforward, so I encourage you to read the man page and develop your code on a lab machine. If you don’t, just be aware that different machines have different mechanisms regarding st_mtime. For example, on my Macintosh (OS X 10.11.6), the struct stat does not have st_mtime, but instead has:
struct timespec st_mtimespec; |
Later in the man page, it says:
The time-related fields of struct stat are as follows:
st_atime Time when file data last accessed. Changed by the mknod(2),
utimes(2) and read(2) system calls.
st_mtime Time when file data last modified. Changed by the mknod(2),
utimes(2) and write(2) system calls.
|
So, what gives? Well, if you look at /usr/include/sys/stat.h, you’ll see:
#define st_mtime st_mtimespec.tv_sec |
This means that you can use st_mtime as if it is a member of the struct stat, but it is a little confusing, isn’t it?
-
chmod(). This is nice and straightforward.
-
utimes(). Ok, so this is the world that we’re in:
-
st_mtime is a time_t, and is in some operating systems’ struct stat specifications, but not in others (although it’s supported by a #define).
-
st_mtimespec is a struct timespec, which, if you look it up, has two fields to deal with sub-second times: tv_sec and tv_nsec (nanoseconds). Fortunately, that latter one fits into a 32-bit data type (although I’m not overly sure if that’s what’s used. I would be it’s inconsistent).
-
utimes() has a second parameter which is a pointer to two struct timeval‘s. Really? That one has two fields: tv_sec and tv_usec (microseconds).
-
I understand that this is a pain, but hopefully this prose helps you a little. You’ll have to create an array of two struct timeval‘s for utimes(). Go ahead and set the first one to the current time (I don’t do any testing of the access time in this lab, so you don’t have to worry about it). As for the second one, set the seconds to your stored mtime, and then set the microseconds to zero. Done.
